HBYT-900
防爆电动云台
Application environment
It has IIA, IIB, IIC flammable gas, and the ignition temperature group is zone 1 and zone 2 of the T1-T6 group. The flammable gas or the explosive mixture formed by steam and air is also applicable to the ignition temperature group. It is a place containing a combustible dust mixture in Zones 20, 21, and 22 of the T1-T6 group. Such as: petroleum, chemical, mine, military, medicine, oil depot, ship, drilling platform, gas station, fireworks production, grain processing and storage.
Functional characteristics
● The highest level of explosion-proof certification, explosion-proof mark: ExdIICT6 Gb/Ex tD A21 IP65 T80 °C
● Side-loading design, large rotation angle and large load
● Permanent magnet low-speed synchronous motor, large load force, low noise, stable and reliable operation
● Modular circuit design, support baud rate and automatic identification of control protocol, support soft address setting
● Universal RS-485 communication interface to automatically identify Pelco-d and Pelco-p control protocols
● Low power consumption, internal convection heat dissipation design, long-term uninterrupted work
● Made of 304 stainless steel for use in highly corrosive environments
● Suitable for dangerous places with inflammable, explosive and harsh environment
● Explosion-proof, waterproof and dustproof design, suitable for indoor and outdoor installation, all-weather use
product model | HBYT-900 |
explosion-proof mark | Ex d IIC T6 Gb/Ex tD A21 IP65 T80℃ |
levels of protection | IP65 |
angle of rotation | Horizontal: 0 °～360 °vertical:+ 75 °～-90 ° |
rotational speed | Horizontal: 6 °/ S vertical: 4 °/ S |
communicating protocol | Many common protocols, such as PELCO-D,PELCO-P |
Address range, setting | 1 / 255 (soft address code setting) |
communication mode | RS485 |
Baud rate | 2400 / 4800 / 9600 bps |
load capacity | ≤25kg |
temperature range | -40℃～60℃ |
relative humidity | Not more than 95% (25 °C) |
Atmospheric pressure | 80kpa～106kpa |
Constant temperature system | Optional |
service voltage | AC220V /AC24V |
service voltage | ≤ 55W |
Applicable environment | For explosive gases and combustible dust environments |
Product material | 304 stainless steel material (used in chemical industry, acid and alkali and other strong corrosive environment) |
Intake hole specification | 1 up outlet hole G-1/2”，1 down outlet hole G-3/4” |
outline dimension | 350*190*365mm(length, width, height) |
Installation | Fixed bracket, column, wall mounting |
Product weight | ≤ 15kg |
